IMPORTANT
Risk
of implement damage!
Because of the high setting values, the
automatic steering reacts aggressively. This can
cause damage to the coupled implement or the
sprayer boom.
Start by setting values for less aggressive
steering reaction.
Check the steering reaction.
Increase the values in small steps.
Possible settings:
Track precision: The track precision defines how
aggressively
the automatic steering follows the
track line.
Approach precision: The approach precision
defines how
aggressively the automatic steering
steers towards the track line.
Maximum steering angle: The maximum steering
angle defines how far the automatic steering can
turn the steering.
Smoothing radius for curved track lines: The
smoothing
radius for curved track lines defines how
precisely the automatic steering follows the curved
track lines. With a low value, the curved track lines
are followed more precisely and the curves remain
sharp. With a high value, the curved track lines are
followed less precisely and the curves are rounded.
3. Confirm the settings with .
M | Using automatic steering| Coordinating the automatic steering
MG5574-EN-II | B.1 | 25.10.2016
171
To Next Page
Loading...
