Version 6.4 583 March 2012
SIP User's Manual A. Configuration Parameters Reference
Parameter Description
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1;
Notes:
This table can include up to 32 indices (where 1 is the first index).
The parameter Account_ApplicationType is not applicable.
You can define multiple table indices with the same
ServedTrunkGroup but different ServingIPGroups, username,
password, HostName, and ContactUser. This provides the capability
for registering the same Trunk Group or IP Group to several ITSP's
(i.e., Serving IP Groups).
For a detailed description of this table's parameters and for
configuring this table using the Web interface, see 'Configuring
Account Table' on page 225.
For configuring ini file table parameters, see 'Configuring ini File
Table Parameters' on page 84.
Proxy Registration Parameters
Web: Use Default Proxy
EMS: Proxy Used
[IsProxyUsed]
Enables the use of a SIP proxy server.
[0] No = Proxy isn't used and instead, the internal routing table is
used (default).
[1] Yes = Proxy server is used. Define the IP address of the proxy
server in the Proxy Sets table (see 'Configuring Proxy Sets Table' on
page 200).
Note: If you are not using a proxy server, you must define outbound IP
call routing rules in the Outbound IP Routing Table' (described in
'Configuring Outbound IP Routing Table' on page 271).
Web/EMS: Proxy Name
[ProxyName]
Defines the Home Proxy domain name. If specified, this name is used
as the Request-URI in REGISTER, INVITE, and other SIP messages,
and as the host part of the To header in INVITE messages. If not
specified, the Proxy IP address is used instead.
The value must be string of up to 49 characters.
Web: Redundancy Mode
EMS: Proxy Redundancy
Mode
[ProxyRedundancyMode]
Determines whether the device switches back to the primary Proxy after
using a redundant Proxy.
[0]
Parking = device continues working with a redundant (now active)
Proxy until the next failure, after which it works with the next
redundant Proxy (default).
[1] Homing = device always tries to work with the primary Proxy
server (i.e., switches back to the primary Proxy whenever it's
available).
Note: To use this Proxy Redundancy mechanism, you need to enable
the keep-alive with Proxy option, by setting the parameter
EnableProxyKeepAlive to 1 or 2.
Web: Proxy IP List Refresh
Time
EMS: IP List Refresh Time
[ProxyIPListRefreshTime
]
Defines the time interval (in seconds) between each Proxy IP list
refresh.
The range is 5 to 2,000,000. The default interval is 60.
Web: Enable Fallback to
Routing Table
EMS: Fallback Used
Determines whether the device falls back to the Outbound IP Routing
Table for call routing when Proxy servers are unavailable.
[0] Disable = Fallback is not used (default).
To Next Page
Loading...
