AudioCodes Mediant 600 - Page 773

Version 6.4 773 March 2012
SIP User's Manual A. Configuration Parameters Reference
Parameter Description
[AMSAllowUrlAsAlias]
Determines whether or not play requests for remote URLs are first
verified with local audio segments to determine if any have an alias
matching for the URL. If a match is found, the corresponding local
audio segment is played.
 [0] = Always use remote storage (default).\
 [1] = Check local storage first.
One application for this capability is that of a 'provisioned' cache
within the device. For
details on provisioning an alias and other audio
provisioning capabilities, refer to the Audio Provisioning Server
(APS) User's Manual.
Conferencing Parameters
Web/EMS: Conference ID
[ConferenceID]
Defines the Conference Identification string (up to 16 characters).
The default value is ‘conf’.
For example: ConferenceID = MyConference
Note: To join a conference, the INVITE URI must include the
Conference ID string, preceded by the number of the participants in
the conference, and terminated by a unique number.
For example: Invite sip:4MyConference1234@10.1.10.10.
INVITE messages with the same URI join the same conference.
Web: Beep on Conference
[BipOnConference]
Determines whether or not a beep is played when a participant joins
or leaves a conference (in the latter case, a beep of a different pitch
is heard).
 [0] Disable = Beep is disabled.
 [1] Enable = Beep is enabled (default).
Web: Enable Conference
DTMF Clamping
[EnableConferenceDTMFCla
mp]
Determines the device logic once a DTMF is received on any
conference participant. If enabled, the DTMF is not regenerated
toward the other conference participants. This logic is only relevant
for simple conferencing (NetAnn).
 [0] Disable = Disable
 [1] Enable = Enable (default)
Web: Enable Conference
DTMF Reporting
[EnableConferenceDTMFRe
porting]
Determines the device logic once a DTMF is received on any
conference participant. If enabled, the device reports this DTMF in
an out-of-band SIP message (according to TxDTMFOptions). This
logic is only relevant for simple conferencing (NetAnn).
 [0] Disable = Disable (default)
 [1] Enable = Enable
Web: Active Speakers Min.
Interval
[ActiveSpeakersNotification
MinInterval]
Defines the minimum interval (in 100 msec units) between each
Active Speaker Notification (ASN) events report. These events report
on the active speakers in a conference. The event is issued
whenever the active speakers change.
Minimum configurable interval between events is 500 msec (5 units).
The range is 5 to 2147483647 units. The default is 20 (i.e., 100
msec).
Web: Playback Audio Format
[cpPlayCoder]
Determines the coder when playing a RAW file.
 [1] G711 Mulaw
 [2] G711 Alaw (default)
Web: Record Audio Format
[cpRecordCoder]
Determines the coder for recording all supported file types.
 [1] G711 Mulaw
 [2] G711 Alaw (default)