Instrument List Window Menu
MC4 User Guide 155
Notes.
When creating a new instrument, MC4 takes the Input and Output
Functions based on Functions active in Basic Mode's two windows.
When an instrument to be added is similar to an instrument already
existing in MC4's memory, here's a method for adding it quickly:
1. Locate the already existing and similar instrument from MC4's
instrument list.
2. Select the instrument for calibration.
3. Do not start the calibration but edit the instrument data.
(Select: F1/
Menu
,
Edit Instrument
)
4. Change the Position ID / Position Name / Device ID and Seri-
al Number fields according to your needs. See Position Data
Page on page 157 and Device Data Page on page 158.
5. Save a copy of the instrument (Menu commands: F3/
Close
,
Save a Copy
). Note that possible calibration result data is
not copied, but stays linked to the original instrument.
The available free memory defines how many instruments may be
saved. If there is not enough memory left to create an instrument,
MC4 displays an error message suggesting that you first free some
memory and then retry.
To Next Page
Loading...
