Stepping
MC4 User Guide 75
FIELD
(cont.)
DESCRIPTION/OPTIONS
Step Size
Active only if Step Definition field is set to
"By: 'Step Size'". If applicable, set the fixed
step size here.
Number of Steps
Active only if Step Definition field is set to
"By: 'Number of Steps'". If applicable, set
the number of steps here.
Transfer Function
Defines the input/output correlation.
Available options:
Linear
√x
√x3
√x5
x2
Create New…
The last item in the list allows you to make
your own custom Transfer Function.
Custom Transfer Functions are presented
in chapter Custom Transfer Functions on
page 103.
*
)
Warning!
Do not configure the range settings so that they exceed the al-
lowed input range of the connected instrument. MC4
determines the limits of the range settings based on the
selected quantity and port, not the connected instrument.
To Next Page
Loading...
