82.3-0000010 OM
24
Pressing the switch button 7 (Figure 2.3.1) turns on the flash beacon (if installed
against order).
The position of mirrors can be changed with regulator 1 (Figure 2.3.1).
1 – position regulator for mirrors; 2 – joystick; 3 – joystick mark.
Figure 2.3.2 – Mirror position regulator
To select a mirror to regulate, turn joystick handle 2 (Figure 2.3.2) to position A or
position B.
Setting the joystick 3 mark to position A enables the left mirror regulation.
Setting the joystick 3 mark to position B (as shown in Figure 2.3.2) enables the right
mirror regulation.
Then, tilting the joystick 2 to the left or to the right turns the selected mirror about its
vertical axis. Tilting the joystick up or down turns the selected mirror about its horizontal ax-
is.
The rear window wiper is turned on and off with a toggle switch 43 (Figure 2.1.1).
The rear window wiper shown in figure 2.1.1 can be replaced by the rear window
wiper shown in figure 2.3.3. The rear window wiper can be switched on and off with the
toggle switch 1 (Figure 2.3.3).
1 – toggle switch; 2 – rear window wiper lever.
Figure 2.3.3 – Activation and deactivation of rear window wiper
2.4 USB Connector
BELARUS-82.3" tractors are equipped with USB connector for charging external de-
vices (cell phones, tablets and other devices). USB socket 40 (Figure 2.1.1) is installed on
the side panel, in the electrical socket unit 39.
To Next Page
Loading...
