82.3-0000010 OM
66
3 INTENDED USE OF TRACTOR
3.1 Safety measures to be taken when preparing tractor for operation
Strict observance of safety requirements ensures safe operation of the tractor and
improves its reliability and durability.
Only persons not younger than 17, holders of a tractor driving license to operate the
tractor of drawbar category 1.4, who have been briefed on accident and fire prevention,
may be admitted to operate the tractor.
Prior to operating the tractor, scrutinize this Operator’s Manual. Insufficient
knowledge of tractor controls and usage is a potential of likely accidents.
When performing depreservation of the tractor and optional equipment, follow the
fire prevention instructions and sanitary requirements when dealing with chemicals, rag
wastes and oiled paper.
Before starting to operate the tractor replace special nuts of rear wheel hubs (one at
each hub), used for tractor fastening on the vehicle platform, with the nuts of basic hub
configuration, attached in a set of spare parts, tools and accessories (SPTA). Tighten the
nuts with a torque of 300…350 N·m. Replace special nuts of front wheels (one at each
wheel), used for tractor fastening on the vehicle platform, with the nuts of basic wheel con-
figuration, attached in the SPTA kit. Tighten the nuts with a torque of 200…250 N·m.
The tractor shall be run-in in accordance with the requirements under subsec-
tion 3.4 “Tractor final assembly and run in”.
The tractor shall be completely outfitted and in good working order.
DO NOT dismantle the design-stipulated protective casings or safeguards from the
tractor, as well as other parts and assembly units which affect its safe operation (protective
guard of the fan, rear PTO enclosure, etc.)
It is not allowed to mount units, parts, products and equipment on the tractor that
are not specified as compatible in the operational documentation for the tractor and oper-
ating manuals of the mounted equipment or units.
The technical condition of the braking system, steering controls, lighting and indica-
tion devices and the drive system shall conform to safety requirements of relevant stand-
ards and the present Manual.
The trailed agricultural machines and transportation trailers shall be fitted with rigid
coupling which excludes their swaying and colliding with the tractor during transportation.
The tractor controls shall be provided with reliable locking in their operative posi-
tions.
Keep all the warning signs on the tractor clean and readable. If damaged or lost,
replace them with new ones.
Tractor use without the accumulator battery in the electrical equipment system is
not allowed.
The first aid kit shall be completed as per regulations, adopted on the territory of the
country, where the tractor is used.
To Next Page
Loading...
