Bosch Rexroth Tightening System 350 - Page 229

3 608 878 300 Tightening Technology | Bosch Rexroth AG 229/641
System 350 | 3 608 878 300/2019-03
T+
Tightening time limit X X
TP_
Target function Time X
W*
Angle result error [°] (floating decimal) X
W+
Upper angle limit [°] (floating decimal) X X
W<
Upper angle limit [°] (floating decimal) X X
W>
Lower angle limit [°] (floating decimal) X
WG
Total angle (all steps from TAOS on) X X
WG+
Upper limit for total angle X X
WG–
Lower limit for total angle X X
WP
Target function Angle X
WR
Differential redundancy angle as a floating decimal
number [°]
XXX
WR+
Upper limit for differential redundancy angle X X
WRS
Threshold angle for AR X X
W_
Angle result as a floating decimal number [°]XXX
W–
Lower angle limit [°] (floating decimal) X X
Table 6–12: Display of the results values in the results files
Protocol
element
Meaning
Application
Standard Standard Plus
310
Standard 350
ZZZZZ
Floating decimal number with variable number of
digits and a decimal point
1
1
1 Placeholder for the examples in this documentation
1
YYY
Integer (here with 3 digits)
111
b
Capital letter
111
zs
Step line z/s "A" to "T"
111
rr.k
Card rack number rr (0, 1 to 15); in compact
system: 0
Channel number k (1 to 5) e.g. 2.2; in compact
system: 1
111
erg
General results
111
OK
Results OK X X X
NOK
Results not OK (also for different causes than T, A,
G)
XXX
**CS351 ** 10 characters reserved for CS351 hardware
identifier
XXX
**SE352 ** 10 characters reserved for SE352 hardware
identifier
XXX
**SE352M** 10 characters reserved for SE352M hardware
identifier
XXX
**KE350 ** 10 characters reserved for KE350 hardware
identifier
XXX
**KE350G** 10 characters reserved for KE350 IL hardware
identifier
XXX
Protocol
element
Meaning
Standard
Standard
Plus 310
Standard 350