352/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
MID 0015 Tightening program/tightening application selected
MID 0015 revision 001
Sent by: Tightening controller
A new tightening program or tightening application is selected in the tightening controller.
The message contains the number of the last selected tightening program or tightening application, as well as the
date/time of the last change to the tightening program settings. This message is also sent as a direct response to the
activation for the tightening program or tightening application selection (MID 0014).
Note:
Supported systems and OP variants:
– CS351 compact system: This function is supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW,
and sends the appropriate data to the superior computer each time the tightening program is changed.
– Modular system: This function is only supported for the KE350 (spindle "00") and not for the connected tightening
spindles (only application operation with the modular system). The appropriate data are sent to the superior
controller each time the application program in application block 1 is changed. The information "Date of the last
change in the program setting" is read out from the data of the selected application.
Revision: 001
System Supported by
CS351 compact
system
Rexroth OP, Rexroth OP-Ford, Rexroth OP-BMW
Modular system
KE350
Rexroth OP-Ford
Data field: Data 22 bytes
Possible response MID Error no. Comment
Acknowledge tightening program/
tightening application selected
0016 –
Table 6–83: MID 0015 revision 001
Parameter Comments Bytes
Tightening program/tightening
application number
The value consists of three ASCII characters.
ID -
Value range 000 – 999
Presetting
Example:
Tightening program/
tightening application number
2
Value 002
3
Date of the last change Date output in the format YYYY-MM-DD:HH:MM:SS.
The value consists of 19 ASCII characters.
ID -
Value range 0 – 9, "-" and ":"
Presetting -
Example:
Date of the last change 2008-07-30:19:48:22
Value 2008-07-30-19:48:22
19
Data length revision 001
22
To Next Page
Loading...
