Bosch Rexroth Tightening System 350 - Page 358

358/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
Order Order of processing of the counter steps in the job.
CS351:
In combination with counter steps, auxiliary steps like "Input", "Output",
"Wait", "Remote", "IL Bridge" do not have any influence on the value of
Order.
– 0: free order
Multi-program step (more than one counter value)
– 1: forced order
Single-program step
Multi-program step (one counter value)
Combination of single-program step and multi-program step (one
counter value)
– 2: free and forced order
Combination of single-program step and multi-program step (more
than one counter value)
– Space character "": no order, only auxiliary steps
KE350:
In combination with counter steps, auxiliary steps like "Input", "Output",
"Wait", "IL Bridge" do not have any influence on the value of Order.
– 0: free order
Application block step (more than one application block)
– 1: forced order
Single application step
Application block step (one application block)
Combination of Single application step and application block step (one
application block)
– 2: free and forced order
Combination of Single application step and application block step
(more than one application block)
– Space character "": no order, only auxiliary steps
ID 03
2
Value range 0–2
Presetting -
Example:
Order 1
Value 1
1
Maximum time for first
tightening
Maximum time for first tightening: not supported
The value consists of four ASCII characters.
ID 04
2
Fixed value 0000
4
Maximum time for processing
the job
Maximum time for processing the job: not supported
The value consists of five ASCII characters.
ID 05
2
Fixed value 00000
5
Table 6–88: MID 0033 revision 001
Parameter Comments Bytes