402/641 Bosch Rexroth AG | Tightening Technology 3 608 878 300
System 350 | 3 608 878 300/2019-03
MID 0072 Upload system errors acknowledgement
MID 0073 Cancel system errors subscription
MID 0074 System error in tightening controller acknowledged
MID 0075 Acknowledgement System error in tightening controller acknowledged
Time Date and time when the error occurred.
The value consists of 19 ASCII characters in the format
YYYY-MM-DD:HH:MM:SS.
ID 04
2
Value range 0 – 9, "-" and ":"
Presetting -
Example:
Time 1/12/2009:11:54:29 AM
Value 1/12/2009:11:54:29 AM
19
Data length revision 001
33
Table 6–108: MID 0071 revision 001
Parameter Comments Bytes
Sent by: superordinate computer
Acknowledgement for MID 0071
Note: -
Revision:
001 (supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW)
Data field: is empty, 0 bytes
Possible response: none
Sent by: superordinate computer
Cancel system errors subscription
Note: -
Revision: 001 (supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW)
Data field: is empty, 0 bytes
Possible responses MID Error no. Comment
Command accepted 0005 –
Command error 0004 12 Activation of system errors not available
Sent by: Tightening controller
The tightening controller sends this message to inform the superior computer that an error has been acknowledged.
Note: -
Revision:
001 (supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW)
Data field: Error number, 4 bytes
Possible response MID Error no. Comment
Acknowledgement System error in
tightening controller acknowledged
0075 –
Sent by: superordinate computer
Acknowledgement for MID 0074
Note: -
Revision:
001 (supported by Rexroth OP and Rexroth OP-Ford and Rexroth OP-BMW)
Data field: is empty, 0 bytes
Possible response: none
To Next Page
Loading...
