140
IFS 125M User Manual Bruker Optik GmbH
Web Interface 8
8.2 User authentication
To ensure network reliability the spectrometer firmware provides a user authentication
via Web browser for sensitive instrument configuration pages and blocks unauthorized
modification of the instrument configuration. The protected configuration pages are:
• Measurement Menus
• Direct Command Entry
• Service/List of result data files
• Service/Special commands A
• Service/Special commands B
• Service/Reset Instrument
• and all Service/Edit hardware configuration pages, except for the Backup Flange
Eeprom data to Flashdisk and Backup NVRam to Flashdisk pages.
The user authentication has no influence on the communication connection established
to the spectrometer via OPUS.
i
Only one user account (combination of user name and password) is supported. A par-
ticular user can be logged on from several workstations at the same time.
8.2.1 Activating user authentication
1 • Open Web browser.
• Enter spectrometer IP address into
the address entry field.
• On configuration page, click Authenti-
cation.
2 • Enter user name and password.
• Confirm password.
Table 8.1: Activating user authentication
To Next Page
Loading...
