17
Bruker Optik GmbH IFS 125M User Manual
3 Installation
Unpacking and initial installation of the spectrometer is done by Bruker service engi-
neers. The operating company has to provide an installation site that meets the site
requirements described in this chapter.
3.1 Delivery contents
The IFS 125M spectrometer allows upgrading with additional components and/or acces-
sories. Depending on the spectrometer configuration ordered, the delivery contents may
not include all optional components listed below.
Standard components: • IFS 125M spectrometer
• Electronics unit
• External power supply unit with low-volt-
age cable and power cord, including
country-specific power plug
• Data cable (100Base-T cross-over
cable)
• PC compatible data system (including
Windows or Linux operating system)
• OPUS spectroscopy software (spectrom-
eter control, data acquisition, manipula-
tion and evaluation)
• IFS 125M user manual
•Spare parts
Optional components: • Other OPUS application software pack-
ages (e.g. QUANT, IDENT) and the
respective user manuals
• Accessories
Table 3.1: Delivery contents
To Next Page
Loading...
