179
Bruker Optik GmbH IFS 125M User Manual
Data Communication 9
3 • Enter MAC (Media Access Control
Address), IP and Gateway address.
☞ The Help buttons provide addi-
tional information on how to fill in
the different lines.
➣ The MAC address is the unique
hardware name of the network
interface adapter installed inside
the spectrometer. You find this
address on the label on the front
side of the mobile electronics unit.
In the example on the left, the
MAC address is 00 00 AD 02 AC
11.
➣ Always keep the MAC address on
the label up to date and legible. A
wrong MAC address will lead to
confusion.
➣ The entries for the remaining three
entry fields of the dialog depend on
the network connection type
selected between PC and spec
-
trometer. The figure shows the
standard addresses for the direct
connection between spectrometer
and PC.
• Click the Next button.
4 You are prompted by the program to
set the spectrometer into BootP-mode.
☞ Follow the on-screen instructions.
• Click the Next button.
Table 9.4: Assigning network address
To Next Page
Loading...
