Bruker IFS 125M - Page 204

204
IFS 125M User Manual Bruker Optik GmbH
Default Parameter Settings C
Acquisition parameters Settings
Wanted High Frequency Limit
15,500 cm
-1
Wanted Low Frequency Limit
0 cm
-1
High Pass Filter Open
Low Pass Filter 40 kHz
Acquisition Mode Single Sided, Forward/Backward
Correlation Mode Off
FT parameters Settings
Phase Resolution 4
Phase Correction Mode Mertz
Apodization Function Blackman-Harris 3-Term
Zerofilling Factor 2
Table C.1: Default parameter settings