32
Sync Camera Assembly
(13) RS-485 (LAN3) Communication - (D28-D30) Not Used.
LED D28 (blue) - Direction
LED D29 (red) - Receive
LED D30 (green) - Transmit
(14) RS-485 (LAN2) Communication - (D25-D27) These LEDs turn “ON” when information is
being transmitted or received from the Brunswick bumpers.
LED D25 (blue) - Direction
LED D26 (red) - Receive
LED D27 (green) - Transmit
(15) RS-485 (LAN1) Communication - (D22-D24) These LEDs turn “ON” when information is
being transmitted or received from the GS Series pinsetter.
LED D22 (blue) - Direction
LED D23 (red) - Receive
LED D24 (green) - Transmit
(16) Keypad Even - (D7,D8) These LEDs turn “ON” when information is being transmitted or
received from the even (right) lane Sync Touchpad or Vector Keypad.
LED D7 (red) - Receive
LED D8 (green) - Transmit
(17) Keypad Odd - (D2,D3) These LEDs turn “ON” when information is being transmitted or
received from the odd (left) lane Sync Touchpad or Vector Keypad.
LED D2 (red) - Receive
LED D3 (green) - Transmit
(18) USB - (D16, D17) Not Used.
LED D16 (red) - USB error
LED D17 (green) - USB power
(19) NPS - (D50,D58) These LED turn “ON” when a 12VDC signal is sent to the New Pin Solenoid
that is available as an option on A-2 pinsetters.
LED D50 (green) - Left lane NPS
LED D58 (red) - Right lane NPS
To Next Page
Loading...
