Specify
settings
for
sounding
a ring
to
notify
you of
incoming faxes.
This
feature is
only
available when
<Auto>
or <Fax/Tel
Au
toSwitch> is selected for the receive mode. Specify how many times the incoming call rings when the machine receives a fax call. You
can also disable the settings to prevent the incoming call from ringing.
Off
On
1 to 2 to 99 (times)
NOTE
If
you
use this
feature in the
<Auto>
mode,
you
need to
connect your
telephone
to
the
machine beforehand.
Remote RX
Specify settings for receiving a fax by operating a telephone that is connected to the machine (Remote Reception). When a fax is
sent to the machine, you can receive it just by picking up the handset of the telephone and entering a specific ID number by using
the telephone. This feature can save you the trouble of going all the way to the machine. For instructions on how to use Remote
Reception, see
Using a Telephone to Receive Faxes (Remote Reception).
Off
On
00 to 25 to 99
Switch to Auto RX
Specify settings for automatically receiving a fax after the machine has rung for a specified time period. This feature is only available
when <Manual> is selected for the receive mode. By using this feature, faxes can be received even when no one is available to pick
up the handset.
Off
On
1 to 15
to 99 (sec.)
<Fax Settings> <RX Function Settings> <Incoming Ring> <On> Specify
how many times the incoming call rings
<Apply>
*1
<Fax Settings> <RX Function Settings> <Remote RX> <On> Specify the
ID number for receiving a fax
<Apply>
<Fax Settings> <RX Function Settings> <Switch to Auto RX> <On>
Specify how long the incoming call rings <Apply>
RX Print Settings
㻡㻜㻜㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
