MAC Address Filter
Enable or disable settings for filtering packets sent to or received from devices with specified MAC addresses. Specifying MAC
Addresses for Firewall Rules
Outbound Filter
Off
On
Inbound Filter
Off
On
Specify settings for sending or receiving faxes.
Fax Settings
Specify the communication start speed settings and the R-key settings.
TX Start Speed
Adjust the communication start speed. This adjustment should be made when it takes a long time to start sending a fax due to a
poor telephone line connection.
33600 bps
14400 bps
9600 bps
7200 bps
4800 bps
2400 bps
RX Start Speed
Adjust the communication start speed. This adjustment should be made when it takes a long time to start receiving a fax due to a
poor telephone line connection.
33600 bps
14400 bps
9600 bps
7200 bps
4800 bps
2400 bps
<System Management Settings> <Security Settings> <MAC Address Filter>
Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machine
Communication Management Settings
*1
<System Management Settings> <Communication Management Settings> <Fax
Settings>
Select <TX Start Speed> Select a communication start speed
<System Management Settings> <Communication Management Settings> <Fax
Settings>
Select <RX Start Speed> Select a communication start speed
㻡㻟㻡㻌㻛㻌㻢㻣㻢
To Next Page
Loading...
