FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
3
INSTALLATION
ORIGINAL INSTRUCTIONS 107
3.8.9.3 Reversing belt (EM=R)
EM Typical product Ejector Type Ejection Notes
R
Light/small packed
product, bulk material.
Low/medium throughput.
Reversing belt
Contaminated product
automatically ejected
Available only with
Conveyor Control System
This mode cannot be used with the integrated systems: THS/MBB, THS/M65, THS/M69K, THS/MBR or on all the other
systems involving inversion of the direction of travel.
Operation with manual or automatic ejection of contaminated material, by reversing the belt
direction. This mode can be used for both packaged and bulk products.
Programming menu
Remote
parameter
Description Setting
Ejection > ejection mode
EM
Inversion of the direction of travel to divert the
product into the removal area
R
Ejection > ejector
ED
Distance travelled in reverse, following an
alarm. Set a distance needed for the removal of
the product from the conveyor belt.
0 - 6000 mm
S: Metal Detector probe
N: Conveyor belt
PL: Pack length
DW: Detector width
To Next Page
Loading...
