FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
3
INSTALLATION
ORIGINAL INSTRUCTIONS 71
3.5.8.2 Power Switch
On the Conveyor Control System model, the On/Off switch is located on the power supply unit
cover; in the case of the Control Power Box, an external switch must be fitted.
If necessary, the Conveyor Control System switch can be locked in the OFF
position with a padlock.
When the switch is in the OFF position, depress the central part of the switch
and insert the padlock in the slot created. In this way the switch cannot turn
to the ON position until the padlock has been removed.
To Next Page
Loading...
