Ceia THS/MS21 - Integrated Conveyor; Products that Can be Inspected

2
FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
DESCRIPTION
18 ORIGINAL INSTRUCTIONS
2.1.2 Integrated conveyor
With this version the CEIA THS Metal Detector is fully housed in a high-hygiene, stainless steel
structure fitted with a digital controller for controlling speed and the ejection stages for non-
conforming product.
CEIA inspections systems are available in a wide range of sizes suitable for a wide variety of
applications. The casing structure, the Metal Detector and the belt control panel are all made from
stainless steel.
The conveyor belt, the fully moulded cover for the ejection area and the reject product container
are all fully certified for food-safe applications.
2.1.3 Products that can be inspected
Parts of the Metal Detector and CEIA integrated systems which come in contact with product are
made from FDA certified materials, for full compatibility with food products.
The characteristics of the materials used can be provided by CEIA on request.
Materials that can be inspected
- with dimensions and weight compatible with the opening of the Antenna and the
characteristics of the transport system;
- with chemical-physical characteristics compatible with the parts of the System that come in
contact with the product;
- without metal parts, in accordance with the detection sensitivity required.
Materials that can NOT be inspected
- all those which do not comply with even one of the points listed above.