Ceia THS/MS21 - Safety Instructions and Warnings; Device Users, Instruction Level, and Training

1
FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
SAFETY INSTRUCTIONS -
W
ARNINGS
8 ORIGINAL INSTRUCTIONS
Read this manual carefully before installing or operating the device and before carrying out maintenance operations.
1 SAFETY INSTRUCTIONS – WARNINGS
1.1 Device users, required instruction level and training
The following table shows the list of all possible users and their required instruction level and
training throughout the life cycle of the device.
Life cycle Users involved Required instruction level / Training requirements
1
Transport Stores operators
responsible for
loading and
unloading
products from
vehicles.
Trained and qualified for handling loads.
Knowledge of current regulations regarding health and safety in the workplace.
Knowledge of the methods for loading, unloading and handling the machine
inside packing. Knowledge of the weight of the machine.
Transport
contractors
Trained and qualified for this work.
Knowledge of current regulations regarding health and safety in the workplace.
Knowledge of the methods for loading, unloading and handling the machine
inside packing. Knowledge of the weight of the machine.
2
Assembly and
Installation
Installation
technicians
Trained and qualified for the installation of the mechanical, electrical and
pneumatic equipment on the machine.
Knowledge of the hazards connected with this work. Knowledge of the personal
protective equipment (PPE) to be used.
Knowledge of current regulations regarding health and safety in the workplace
and electrical safety.
Knowledge of the precautions, content and procedures specified in the
Installation and Maintenance Manual, in the Operating Manual and in the
Programming Manual supplied with the machine.
3
Commissioning Installation
technicians
Trained and qualified for this work.
Knowledge of current regulations regarding health and safety in the workplace
and electrical safety.
Knowledge of the precautions, content and procedures specified in the
Installation and Maintenance Manual, in the Operating Manual and in the
Programming Manual supplied with the machine.
Knowledge of the processes performed with the machine in order to be able to
set up and test the efficiency of the machine in production processes.
4.1
Use: setting up. NA The machine does not require setting up prior to standard use.
4.2
Use: teaching,
programming or
process changeover.
Operator Trained and qualified for this work.
Knowledge of current regulations regarding health and safety in the workplace
and electrical safety.
Knowledge of the precautions, content and procedures specified in the
Operating Manual and in the Programming Manual supplied with the machine.
Knowledge of the processes performed with the machine in order to be able to
set up and test the efficiency of the machine in production processes.
4.3
Use: operation. Operator Knowledge of current regulations regarding health and safety in the workplace.
Knowledge of the precautions, content and procedures specified in the
Operating Manual.
Knowledge of the processes performed with the machine in order to be able to
set up and test the efficiency of the machine in production processes and in the
other tasks assigned.