Ceia THS/MS21 - Unpacking Procedure; Packing List

3
FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
INSTALLATION
58 ORIGINAL INSTRUCTIONS
3.2.1.2 Unpacking procedure
Keep the packaging materials for possible future transport.
Read the packing list to check that
the packing content is complete.
Using cutters, cut and remove all
plastic straps from the packing.
Using pliers, extract all metal
staples from the upper surface of
the packing.
Open the box and remove the
protective support.
Using pliers, extract all metal
staples from the bottom side
surface of the packing.
Lift the box upwards from the
wooden base, taking care that the
Power Supply Box does not fall
out.
Put the Power Supply Box down
on the floor and remove the
protective support.
Using cutters, cut and remove all
plastic straps from the probe.
The Metal Detector is ready for
installation.
3.2.1.3 Packing list
The package contains:
- THS Metal Detector probe connected to the power supply box ordered
- Operator manual
- CD-Rom with the following files: Installation, Use and Maintenance Manual, Programming
Manual, Spare Parts List, Operator Manual
- Quality Control Test Samples (if ordered)