FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
4
USE OF THE DEVICE
ORIGINAL INSTRUCTIONS 125
4.4 Switching on the Metal Detector
4.4.1 Checking the safety features
THS/21x
1
Power supply unit
There are dangerous
voltages inside the power
supply unit. Close the cover
and keep the key safe so
that it is only available for
use by trained personnel
(EN 60204 Standard). This
will also prevent accidental
switching when the cover is
closed. The switch can be
padlocked in the OFF
position during
maintenance.
2
Guard covers
Check that all guard covers
are correctly fitted and
fastened in place.
3
Reject bin
Check that the reject bin is
in position and correctly
fastened.
4
Floor fixing
Version with feet: check
that the structure is firmly
anchored to the floor.
Version with castors: check
that the castors are locked.
5
Obstructions on belt
Before you start the
conveyor belt, check that
there are no extraneous
objects on the belt.
6
Emergency buttons
Check that all the
emergency buttons
installed in the system work
correctly
7
Product exit
Check it is correctly placed
next to the following
conveyor or that there is an
unloading belt with fixed
guard.
8
Compressed air
interception valve
This valve can be closed
with a padlock for
maintenance operations.
THS/FBB and THS/MBB
THS/FB and THS/M65
THS/MBR
1
1
To Next Page
Loading...
