FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
5
MAINTENANCE
ORIGINAL INSTRUCTIONS 141
5.2.3 Cleaning the Conveyor belt
Shut down the system at the main switch.
5.2.3.1 Ejection system
If the conveyor belt is fitted with an ejection system, perform the following steps, before continuing:
THS/FBB and THS/MBB ejection system
Unlock the transparent cover of the
ejection area, using its key.
Remove the transparent cover from the
ejection area.
Empty product from the bin, then lift it up
and remove it from its supports.
THS/FB, THS/M65 and THS/M69K ejection system
Unlock the transparent cover of the
ejection area, using its key.
Remove the transparent cover from the
ejection area.
To Next Page
Loading...
