Ceia THS/MS21 - Page 7

FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
ORIGINAL INSTRUCTIONS 7
Preface
This document is the property of CEIA S.p.A. which reserves all rights. Total or partial copying,
modification and translation is forbidden.
CEIA reserves the right to make changes, at any time and without notice, to the models (including
programming), their accessories and options, and to the prices and conditions of sale.
The Metal Detector or the CEIA integrated system must be used only for the prescribed purpose
and in the ways described in this Manual. CEIA may not be held responsible for the consequences
resulting from a use other than that indicated in this Manual.
Purpose of the documentation
The complete documentation for a CEIA Metal Detector is made up of a series of Manuals, whose
purposes are listed in the following paragraphs:
Installation, Use and Maintenance Manual
The purpose of the Installation, Use and Maintenance Manual is to provide the information needed
for:
- installing the Metal Detector or CEIA integrated system, according to the electrical and
mechanical requirements specified by CEIA;
- configuring the Metal Detector in accordance with the type of installation and use;
- correct use of the conveyor belt system;
- correct maintenance, both ordinary and extraordinary.
Programming Manual
The purpose of the Programming Manual is to provide a description of all the items of the System
Programming Menu to:
- define the users authorized to operate the System;
- programme the Metal Detector in accordance with the type of product to be inspected;
- make remote connections with the Metal Detector, using the available communication
interfaces.
Operator Manual
The purpose of the Operator Manual is to provide all the information needed by the operator for
daily use of the system.
Options, Accessories and Spare Parts List
The purpose of this document is to provide a quick consultation table for ordering any spare parts,
options and accessories.