FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
1
SAFETY INSTRUCTIONS -
ARNINGS
ORIGINAL INSTRUCTIONS 9
Life cycle Users involved Required instruction level / Training requirements
4.4
Use: cleaning. Operator Knowledge of current regulations regarding health and safety in the workplace.
Knowledge of the cleaning procedures specified by the customer.
Knowledge of the precautions, content and procedures specified in the
Operating Manual.
4.5
Use: fault finding. Operator Knowledge of current regulations regarding health and safety in the workplace.
Knowledge of the precautions, content and procedures specified in the
Operating Manual.
Knowledge of the processes performed with the machine in order to be able to
set up and test the efficiency of the machine in production processes and in the
other tasks assigned.
Maintenance
technician
Trained and qualified for the installation of the mechanical, electrical and
pneumatic equipment on the machine.
Knowledge of the hazards connected with this work. Knowledge of the
precautions to be taken and the personal protective equipment (PPE) to be
used.
Knowledge of current regulations regarding health and safety in the workplace
and electrical safety.
Knowledge of the precautions, content and procedures specified in the
Installation and Maintenance Manual, in the Operating Manual and in the
Programming Manual supplied with the machine.
4.6
Use:
Ordinary maintenance.
Operator Knowledge of current regulations regarding health and safety in the workplace.
Knowledge of the precautions, content and ordinary maintenance procedures
specified in the Operating Manual.
5
Technical
maintenance.
Maintenance
technician
Trained and qualified for the mechanical, electrical and pneumatic maintenance
activities performed on the machine.
Knowledge of the hazards connected with this work. Knowledge of the
precautions to be taken and the personal protective equipment (PPE) to be
used.
Knowledge of current regulations regarding health and safety in the workplace.
Knowledge of the precautions, content and procedures specified in the
Installation and Maintenance Manual, in the Operating Manual and in the
Programming Manual supplied with the machine.
6
De-commissioning,
dismantling and safe
disposal.
Maintenance
technician
Trained and qualified for the mechanical, electrical and pneumatic maintenance
activities performed on the machine.
Knowledge of the hazards connected with this work. Knowledge of the
precautions to be taken and the personal protective equipment (PPE) to be
used.
Knowledge of current regulations regarding health and safety in the workplace.
Knowledge of the national regulations regarding the decommissioning and
disposal of industrial electrical equipment.
Knowledge of the precautions, content and procedures specified in the
Installation and Maintenance Manual, in the Operating Manual and in the
Programming Manual supplied with the machine.
To Next Page
Loading...
