FI002K0018v1100UK – THS/21 Instruction manual for installation, use and maintenance
1
SAFETY INSTRUCTIONS -
ARNINGS
ORIGINAL INSTRUCTIONS 13
- Failure to follow the operating instructions in this manual may cause a loss of food
characteristics.
- On equipment where the material to be inspected is loaded and unloaded manually, it is the
customer’s responsibility to assess the risks to operator health and safety.
- On integrated systems with the Following Conveyor connected up, the belt may start and
stop unexpectedly because it is controlled from this infeed line.
- If the system is fitted with wheels, these must be locked. All the connection cables must be
suitably fastened, in order to avoid accidental impacts or injury or risks for the operators and
achieve the best operation of the device.
- The vibration risk to the hand-arm system is not applicable.
To Next Page
Loading...
