CI Systems ControlMaster SR-800R - Page 101

CI Systems SR-800R
Command Category Description Remarks
SETTEMPERATURE Set Temperature of
Controller per current
Temperature Operating
Mode.
Replaces ST
ST
2
Set Temperature of
Controller per current
Temperature Operating
Mode.
See SETTEMPERATURE
RR
2
Get Radiometric Offset
Value.
SR
2
Set Radiometric Offset
Value.
IO:
GETINPUTSTATUS Get IO Input State.
OUTPUTENABLE Enable IO Output
Driver.
SETOUTPUT
Set IO Output State.
General:
ECHO Echo Command.
SETPRESET Set Preset Number -
Activates the requested
preset.
GETMAXPRESETCOUNT Get the Current
Number of Presets
defined in the System.
*IDN? Identify Controller. GPIB command only!
RV
2
Retrieve the Controller
SW Version.
GETBITERROR Get the Online BIT
Error of the Controller.
GETSYSTEMINFO Retrieve controller SN,
SW Version etc.
Replaces RV
CALIBRATETOUCHPANEL Calibrate the Touch
Panel.
605-7040 Operation Manual
Rev D 6-6
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com