CI Systems ControlMaster SR-800R - Page 102

CI Systems SR-800R
Command Category Description Remarks
SETREMOTETYPE Set the remote
communications type
between the Host and
the ControlMaster.
Ethernet, GPIB or RS232
GETABSOLUTESETPOINT Get the Current
Absolute Temperature
set point.
GETDIFFERENTIALSETPOIN
T
Get the Current
Differential
Temperature set point.
SETCOMPUTERNAME Computer Nickname
used to identify the
controller when
communicating with it.
DM
2
Display Mode
605-7040 Operation Manual
Rev D 6-7
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com