46-43
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
Chapter 46 Configuring 802.1X Port-Based Authentication
Configuring 802.1X Port-Based Authentication
Cisco ACS Configuration for DACL
Note Only Cisco ACS supports DACL.
To ensure correct functioning of the ACS configuration required for DACL, follow these steps:
Step 1 Configure a downloadable IP ACL on the window that appears when you select
Radius Shared Profile > Downloadable IP ACL Content (Figure 46-10).
Figure 46-10 Shared Profile Components
Step 2
Attach this downloadable ACL with the USER on the window that appears when you select User >
DACLs (Figure 46-11).
Figure 46-11 Downloadable ACLs
URL-Redirect
To configure URL-direct, you need to configure it on the ACS, and on the switch.
To Next Page
Loading...
