Contents
18
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
VMPS Database Configuration File Example 16-32
Configuring IP Unnumbered Interface 17-1
About IP Unnumbered Interface Support 17-1
IP Unnumbered Interface Support with DHCP Server and Relay Agent 17-2
DHCP Option 82 17-2
IP Unnumbered Interface with Connected Host Polling 17-3
IP Unnumbered Configuration Guidelines and Restrictions 17-3
Configuring IP Unnumbered Interface Support with DHCP Server 17-4
Configuring IP Unnumbered Interface Support on LAN and VLAN Interfaces 17-4
Configuring IP Unnumbered Interface Support on a Range of Ethernet VLANs 17-5
Configuring IP Unnumbered Interface Support with Connected Host Polling 17-6
Displaying IP Unnumbered Interface Settings 17-7
Troubleshooting IP Unnumbered Interface 17-8
Related Documents 17-8
Configuring Layer 2 Ethernet Interfaces 18-1
About Layer 2 Ethernet Switching 18-1
Layer 2 Ethernet Switching 18-2
Switching Frames Between Segments 18-2
Building the MAC Address Table 18-2
VLAN Trunks 18-3
Layer 2 Interface Modes 18-3
Default Layer 2 Ethernet Interface Configuration 18-4
Layer 2 Interface Configuration Guidelines and Restrictions 18-4
Configuring Ethernet Interfaces for Layer 2 Switching 18-5
Configuring an Ethernet Interface as a Layer 2 Trunk 18-5
Configuring an Interface as a Layer 2 Access Port 18-7
Clearing Layer 2 Configuration 18-8
Configuring SmartPort Macros 19-1
About SmartPort Macros and Static SmartPort 19-1
Configuring SmartPort Macros 19-2
Passing Parameters Through the Macro 19-3
Macro Parameter Help 19-3
Default SmartPort Macro Configuration 19-4
cisco-global 19-4
cisco-desktop 19-4
cisco-phone 19-5
To Next Page
Loading...
