Cisco Catalyst 4500 Series Administration Guide

Contents
19
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
cisco-router 19-5
cisco-switch 19-5
SmartPort Macro Configuration Guidelines 19-6
Creating SmartPort Macros 19-8
Applying SmartPort Macros 19-8
cisco-global 19-10
cisco-desktop 19-10
cisco-phone 19-11
cisco-switch 19-11
cisco-router 19-12
Displaying SmartPort Macros 19-13
Configuring Static SmartPort Macros 19-13
Default Static SmartPort Configuration 19-13
Static SmartPort Configuration Guidelines 19-14
Applying Static SmartPort Macros 19-14
Configuring Cisco IOS Auto Smartport Macros 20-1
About Auto Smartport Macros 20-1
Device Classifier 20-2
Device Visibility Mode 20-3
Configuring Auto Smartport Macros 20-3
Enabling Auto Smartport Macros 20-3
Auto Smartport Default Configuration 20-4
Auto Smartport Configuration Guidelines 20-5
Configuring Auto Smartport Built-in Macro Parameters 20-6
Configuring User-Defined Event Triggers 20-8
802.1X-Based Event Trigger 20-8
MAC Address-Based Event Trigger 20-9
Configuring Mapping Between User-Defined Triggers and Built-in Macros 20-9
Configuring Auto Smartport User-Defined Macros 20-10
Displaying Auto Smartport 20-13
Configuring STP and MST 21-1
About STP 21-1
Understanding the Bridge ID 21-2
Bridge Priority Value 21-2
Extended System ID 21-3
STP MAC Address Allocation 21-3
Bridge Protocol Data Units 21-3
Election of the Root Bridge 21-4

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E