Cisco Catalyst 4500 Series - Page 1803

Index
IN-33
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
using with VLAN maps 52-25
router ACLs, using PACL with VLAN maps 52-32
route targets
VPN
40-3
Routing Information Protocol
See RIP
RPF
See Unicast RPF
RSPAN
configuration guidelines
56-16
destination ports 56-5
IDS 56-2
monitored ports 56-4
monitoring ports 56-5
received traffic 56-3
sessions
creating
56-17
defined 56-3
limiting source traffic to specific VLANs 56-23
monitoring VLANs 56-21
removing source (monitored) ports 56-20
specifying monitored ports 56-17
source ports 56-4
transmitted traffic 56-4
VLAN-based 56-5
RSTP
compatibility
21-23
description 21-22
port roles 21-24
port states 21-24
S
S/M, 224/4 36-13
SAID
See 802.10 SAID
SAP
defined
44-9
negotiation 44-9
support 44-1
scheduling 41-8
scheduling, IP SLAs operations 67-5
secondary edge port, REP 23-4
secondary root switch 21-12
secondary VLANs 43-2
associating with primary 43-16
permitting routing 43-23
security
configuring
49-1
Security Association Identifier
See 802.10 SAID
Security Exchange Protocol
See SXP
Security Exchange Protocol
See SAP
selecting a power management mode
13-10
selecting X2/TwinGig Convertor Mode 8-14
sequence numbers in log messages 59-7
server IDs
description
66-23
service policy, configure class-level queue-limit 41-31,
41-65
service-policy input command 32-2
service-provider networks
and customer VLANs
28-2
session keys, MKA 44-2
set default interface command 39-7, 39-8, 39-9, 39-10
set interface command 39-7, 39-9
set ip default next-hop command 39-7, 39-9
set ip next-hop command 39-6, 39-7, 39-9, 39-12
set-request operation 61-4
severity levels, defining in system messages 59-8
shaping, QoS on Sup 6-E 41-25, 41-59
sharing(bandwidth), QoS on Sup 6-E 41-27, 41-61
Shell functions
See Auto SmartPorts macros
See Auto Smartports macros
Shell triggers