EasyManua.ls Logo

Cisco Catalyst 4500 Series - Page 42

Cisco Catalyst 4500 Series
1814 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Contents
42
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Example 1: Configuring a Maximum Limit of Secure MAC Addresses for All VLANs 48-19
Example 2: Configuring a Maximum Limit of Secure MAC Addresses for Specific VLANs 48-20
Example 3: Configuring Secure MAC Addresses in a VLAN Range 48-20
Trunk Port Security Configuration Guidelines and Restrictions 48-21
Port Mode Changes 48-22
Configuring Port Security on Voice Ports 48-22
Configuring Port Security on Voice Ports 48-23
Examples of Voice Port Security 48-25
Example 1: Configuring Maximum MAC Addresses for Voice and Data VLANs 48-25
Example 2: Configuring Sticky MAC Addresses for Voice and Data VLANs 48-26
Voice Port Security Configuration Guidelines and Restrictions 48-27
Displaying Port Security Settings 48-27
Examples of Security Settings 48-28
Example 1: Displaying Security Settings for the Entire Switch 48-28
Example 2: Displaying Security Settings for an Interface 48-29
Example 3: Displaying All Secure Addresses for the Entire Switch 48-29
Example 4: Displaying a Maximum Number of MAC Addresses on an Interface 48-30
Example 5: Displaying Security Settings on an Interface for a VLAN Range 48-30
Example 6: Displaying Secured MAC Addresses and Aging Information on an Interface 48-30
Example 7: Displaying Secured MAC Addresses for a VLAN Range on an Interface 48-31
Configuring Port Security with Other Features/Environments 48-31
DHCP and IP Source Guard 48-31
802.1X Authentication 48-32
Configuring Port Security in a Wireless Environment 48-32
Port Security Configuration Guidelines and Restrictions 48-33
Configuring Control Plane Policing and Layer 2 Control Packet QoS 49-1
Configuring Control Plane Policing 49-2
About Control Plane Policing 49-2
General Guidelines for Control Plane Policing 49-3
Default Configuration 49-4
Configuring CoPP for Control Plane Traffic 49-4
Configuring CoPP for Data Plane and Management Plane Traffic 49-5
Control Plane Policing Configuration Guidelines and Restrictions 49-8
All supervisor engines 49-8
Do not apply to Catalyst 4900M, Catalyst 4948E, Supervisor Engine 6-E, and Supervisor Engine
6L-E
49-8
Monitoring CoPP 49-9
Configuring Layer 2 Control Packet QoS 49-11
Understanding Layer 2 Control Packet QoS 49-11

Table of Contents

Other manuals for Cisco Catalyst 4500 Series

Related product manuals