Cisco Catalyst 4500 Series - Page 51

Contents
51
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Configuring NetFlow-lite 62-1
About NetFlow Packet Sampling 62-2
Feature Interaction 62-2
System-wide Restrictions 62-2
Interface-level Restrictions 62-2
Monitor-level Restrictions 62-2
Configuring NetFlow Packet Sampling 62-2
Configuring Information about the External Collector 62-3
Example 62-3
Usage Guidelines 62-4
Configuring Sampling Parameters 62-4
Example 62-5
Usage Guidelines 62-5
Activating Sampling on an Interface or VLAN 62-5
Examples 62-6
Usage Guidelines 62-7
Display Commands 62-8
Clear Commands 62-9
Configuring Flexible NetFlow 63-1
VSS Environment 63-1
Non-VSS Environment 63-7
Configuring Ethernet OAM and CFM 64-1
About Ethernet CFM 64-2
Ethernet CFM and OAM Definitions 64-2
CFM Domain 64-2
Maintenance Associations and Maintenance Points 64-4
CFM Messages 64-5
Crosscheck Function and Static Remote MEPs 64-5
SNMP Traps and Fault Alarms 64-5
Configuration Error List 64-6
IP SLAs Support for CFM 64-6
Configuring Ethernet CFM 64-6
Ethernet CFM Default Configuration 64-7
Ethernet CFM Configuration Guidelines 64-7
Configuring the CFM Domain 64-8
Configuring Ethernet CFM Crosscheck 64-11
Configuring Static Remote MEP 64-13
Configuring a Port MEP 64-14