Contents
55
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Hardware Acceleration 70-2
.Understanding WCCP Configuration 70-3
WCCP Features 70-4
HTTP and Non-HTTP Services Support 70-4
Multiple Routers Support 70-4
MD5 Security 70-5
Web Content Packet Return 70-5
Restrictions for WCCP 70-5
Configuring WCCP 70-6
Configuring a Service Group Using WCCP 70-6
Specifying a Web Cache Service 70-8
Using Access Lists for a WCCP Service Group 70-8
Setting a Password for a Router and Cache Engines 70-9
Verifying and Monitoring WCCP Configuration Settings 70-9
WCCP Configuration Examples 70-10
Performing a General WCCP Configuration Example 70-10
Running a Web Cache Service Example 70-10
Running a Reverse Proxy Service Example 70-10
Running TCP-Promiscuous Service Example 70-11
Running Redirect Access-List Example 70-11
Using Access Lists Example 70-11
Setting a Password for a Switch and Content Engines Example 70-11
Verifying WCCP Settings Example 70-12
Configuring MIB Support 71-1
Determining MIB Support for Cisco IOS Releases 71-1
Using Cisco IOS MIB Tools 71-2
Downloading and Compiling MIBs 71-2
Guidelines for Working with MIBs 71-3
Downloading MIBs 71-3
Compiling MIBs 71-4
Enabling SNMP Support 71-4
ROM Monitor 72-1
Entering the ROM Monitor 72-1
ROM Monitor Commands 72-2
ROM Monitor Command Descriptions 72-3
Configuration Register 72-3
Changing the Configuration Register Manually 72-3
To Next Page
Loading...
