Contents
54
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Response Time Computation for IP SLAs 67-4
IP SLAs Operation Scheduling 67-5
IP SLAs Operation Threshold Monitoring 67-5
Configuring IP SLAs Operations 67-6
IP SLA Default Configuration 67-6
IP SLA Configuration Guidelines 67-6
Configuring the IP SLAs Responder 67-7
Analyzing IP Service Levels by Using the UDP Jitter Operation 67-8
Analyzing IP Service Levels by Using the ICMP Echo Operation 67-11
Monitoring IP SLAs Operations 67-13
Configuring RMON 67-1
About RMON 67-1
Configuring RMON 67-3
Default RMON Configuration 67-3
Configuring RMON Alarms and Events 67-3
Configuring RMON Collection on an Interface 67-5
Displaying RMON Status 67-6
Performing Diagnostics 69-1
Configuring Online Diagnostics 69-1
Configuring On-Demand Online Diagnostics 69-2
Scheduling Online Diagnostics 69-2
Performing Diagnostics 69-3
Starting and Stopping Online Diagnostic Tests 69-3
Displaying Online Diagnostic Tests and Test Results 69-4
Displaying Data Path Online Diagnostics Test Results 69-7
Line Card Online Diagnostics 69-8
Troubleshooting with Online Diagnostics 69-8
Power-On Self-Test Diagnostics 69-10
Overview of Power-On Self-Test Diagnostics 69-10
POST Result Example 69-11
Power-On Self-Test Results 69-13
Sample Display of the POST on an Active Supervisor Engine 69-13
Sample Display of the POST on a Standby Supervisor Engine 69-16
Troubleshooting the Test Failures 69-20
Configuring WCCP Version 2 Services 70-1
About WCCP 70-1
Overview 70-2
To Next Page
Loading...
