Contents
53
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Server MEP 65-2
Alarm Indication Signal 65-2
Ethernet Remote Defect Indication 65-3
Configuring Y.1731 65-4
Y.1731 Configuration Guidelines 65-4
Configuring AIS Parameters 65-5
Clearing MEP from the AIS Defect Condition 65-6
Clearing SMEP from the AIS Defect Condition 65-6
Displaying Y.1731 Information 65-6
Configuring Call Home 66-1
About Call Home 66-2
Obtaining Smart Call Home 66-2
Configuring Call Home 66-3
Configuring Contact Information 66-4
Configuring Destination Profiles 66-5
Copying a Destination Profile 66-6
Subscribing to Alert Groups 66-6
Configuring Periodic Notification 66-8
Configuring Message Severity Threshold 66-8
Configuring Syslog Pattern Matching 66-9
Configuring General E-Mail Options 66-9
Enabling Call Home 66-10
Testing Call Home Communications 66-10
Sending a Call Home Test Message Manually 66-11
Sending a Call Home Alert Group Message Manually 66-11
Sending a Request for an Analysis and Report 66-12
Sending the Output of a Command 66-13
Configuring and Enabling Smart Call Home 66-13
Displaying Call Home Configuration Information 66-14
Call Home Default Settings 66-18
Alert Group Trigger Events and Commands 66-18
Message Contents 66-21
Syslog Alert Notification in Long-Text Format Example 66-25
Syslog Alert Notification in XML Format Example 66-28
Configuring Cisco IOS IP SLA Operations 67-1
Understanding Cisco IOS IP SLAs 67-2
Using Cisco IOS IP SLAs to Measure Network Performance 67-3
IP SLAs Responder and IP SLAs Control Protocol 67-4
To Next Page
Loading...
