Cisco SPA303 Administration Guide

Customizing Cisco SPA and Wireless IP Phones
Customizing Phone Softkeys
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 64
3
bxfer BlindXfer/
bxfer
Performs a blind call transfer
(transfers a call without speaking
to the party to whom the call is
transferred). Requires that Blind
Xfer Serv is enabled.
Connected,
Connected
cancel Cancel Cancels a call (for example, when
conferencing a call and the
second party is not answering).
Dialing Input
cfwd Forward Forwards all calls to a specified
number.
Idle, Off-Hook,
Hold, Shared-
Active, Shared-
Held
chkcfwd Clr Fwd/-
cfwd
Deactivates call forwarding. Idle
chkdnd Clr DND/-
dnd
Deactivates Do Not Disturb. Idle
clear Clear Clears an entire text/number field. Input
conf Conf Initiates a conference call.
Requires that Conf Serv is
enabled and there are two or more
calls that are active or on hold.
Connected, Start-
Conf
confLx Conf Line Conferences active lines on the
phone. Requires that Conf Serv is
enabled and there are two or more
calls that are active or on hold.
Connected
delchar delChar Deletes a character when entering
text.
Dialing (input)
dial Dial Dials a number. Dialing (input)
dir Dir Provides access to phone
directories.
Idle, Connected,
Start-Conf, Start-
Xfer, Off-Hook (no
input), Redial
Keyword Key Label Definition Available Phone
States

Cisco SPA303 Specifications

General

Display	Monochrome LCD
Lines	3
Speakerphone	Yes
Headset Jack	Yes (2.5 mm)
Handset	Yes
Ethernet Ports	2 x 10/100 Mbps
Protocol	SIP
Power	Power over Ethernet (PoE) or AC adapter
Audio Codec Support	G.711, G.729
QoS	802.1p/q