CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Serial-based Remote Product Management 8–29 MN-CDM570A
Parameter
Type
(Instruction
Code and
Qualifier)
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Interval
numerical
Sets or returns the sample interval for the Statistics Logging Function in the form x,
where:
x = 0 to 9 in 10 minute steps.
Note: Setting this parameter to 0 disables the statistics logging function.
Example: <0/SSI=3 (30 minutes)
SSI?
SSI*
SSI#
Description of
Arguments)
stored Statistics
Returns the number of stored statistics that remain unread over the remote interface
in the form xxx.
Example: <0/NUS?
Description of
Arguments)
Statistics
This command takes no arguments.
Forces the software to clear the software statistics log
CAS?
CAS*
Pointer
This command takes no arguments.
Resets internal pointer to allow RNS? queries to start at the beginning of the
ISP#
unread stored
Statistics
Returns the oldest 5 Stored Statistics that remain unread over the remote interface
in the forms:
For non-IP-ACM modes:
{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Subbody{CR}Sub-body
where Sub-body = AA.ABB.BC.CD.Dddmmyyhhmmss:
AA.A=Minimum Eb/No during sample period.
BB.B=Average Eb/No during sample period.
C.C=Max. Tx Power Level Increase during sample period.
D.D=Average Tx Power Level Increase during sample period.
ddmmyyhhmmss = date/time stamp.
BC.CD.Dddmmyyh
hmmss{CR}AA.AB
B.BC.CD.Dddmmyy
hhmmss{CR}AA.AB
B.BC.CD.Dddmmyy
hhmmss{CR}AA.AB
B.BC.CD.Dddmmyy
hhmmss{CR}AA.AB
B.BC.CD.Dddmmyy
hhmmss
(see Description of