CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Serial-based Remote Product Management 8–41 MN-CDM570A
Parameter
Type
(Instruction
Code and
Command or
Response to
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Configuration in
CDM-570A
Compatible Mode
(CMO=1)
(continued)
rrrr.rrr = Tx Symbol Rate
ssss.sss = Rx Symbol Rate
a = Tx BERT State
b = Tx BERT Pattern
x = expansion bytes
c = Rx BERT State
d = Rx BERT Pattern
x = expansion bytes
c = Rx BERT State
d = Rx BERT Pattern
e = CnC mode
fff = CnC Frequency Offset
gggGGG= CnC Search Delays
h = Carrier ID State
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx = 47
expansion bytes
Fill unused expansion bytes with ‘x’
same as RSR
same as BTX
same as TBP
same as RTX
same as RBP
same as RTX
same as RBP
same as CNM
same as CCF
same as CSD
same as CAI
Configuration in
CDM-570
Compatible Mode
(CMO=0)
with numerical
and delimiters
Sets or returns Global Configuration of CDM570AL, in CDM-570
Compatible Mode (CMO=0), in the form shown in the Response to
Query column, where:
a = Unit Interface Type
b = T1 Line build-out
c = Unit Framing mode
dddd.dddd = Tx Frequency
e = Tx FEC Type
f = Tx Modulation type
g = Tx FEC Rate
hhhh.hhh = Tx Data Rate
i = Tx Spectrum Inversion
j = Tx Scrambler State
kk.k = Tx Power Level
l = Tx Clock Source
m = Tx Data Invert
n = Tx Carrier State
o = AUPC Enable
ppp.pp = AUPC parameter setup
same as ITF
same as LBO
same as FRM
same as TFQ
same as TFT
same as TMD
same as TCR
same as TDR
same as TSI
same as TSC
same as TPL
same as TCK
same as TDI
same as TXO
same as AUP
same as APP
MGC?
MGC*
MGC#
MGC?n
defghhhhh.hhijkk.kl
mnoppp.ppqrrstxxx
AAAA.AAAABCDE
EEE.EEEFGHIIIJJ.
JKLMxxxxxxNOPP
PPQRRRRRRRRR
RRRSTUVVVVVV
(see Description of
Arguments)
Where n=0 to 9
Returns the MGC
portion of 1 of 10
stored
configurations (see
Description of
Arguments)
To Next Page
Loading...
