Comtech EF Data CDM-570AL - Page 318

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Serial-based Remote Product Management 8–52 MN-CDM570A
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Faults and
Status (continued)
c = Rx Traffic status:
0 = Rx Traffic OK
1 = Demodulator unlocked
2 = Reserved
3 = AGC Alarm - signal out of range
4 = Reserved
5 = RS Frame sync alarm
6 = Reserved
7 = EDMAC Frame sync alarm
8 = APC Band mismatch alarm
A = Buffer Underflow
B = Buffer Overflow
D = Eb/No alarm
E = LNB Alarm (if attached)
F = AIS detected on incoming data
9 = Reserved
A = Buffer Underflow
B = Buffer Overflow
C = Reserved
D = Eb/No alarm
E = LNB Alarm (if attached)
F = AIS detected on incoming data