CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Optional Packet Processor - Serial/Telnet CLI Operation 9–67 MN-CDM570A
3
Currently Loaded Packet Processor
and Base Modem firmware:
• Boot
• IP Bulk #1
• IP Bulk #2
• EVENTLOG
• PARAM
• BaseBoot
• Base Bulk #1
Base Bulk #2
• Displays Build Date, CEFD FW#, Revision #, and size of
each Packet Processor and Base Modem firmware file:
• Boot file for the Packet Processor and the Base Modem.
• Bulk file contains all of the SW files for the Packet
Processor and Base Modem and there are two slots
available.
• Displays the date/time that the EVENTLOG file was last
updated.
• Displays the date/time that the PARAM1 file was last
updated. Also shows what user interface was used to last
update the PARAM file.
o From CLI, displays ‘console’
o From Web, displays ‘http’
o From Telnet, displays the Telnet user login name
o From SNMP, displays ‘snmp’
9.3.10.2 Operations and Maintenance > Statistics Menu
Open the nested Statistics Menu page from the Operations and Maintenance page.
Figure 9-52. Statistics Menu
To Next Page
Loading...
