Comtech EF Data CDM-570AL - Page 394

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Optional Packet Processor - Serial/Telnet CLI Operation 9–66 MN-CDM570A
9.3.10.1 Operations and Maintenance > Unit Information
Open the Unit Information page from the Operations and Maintenance page.
Figure 9-51. Unit Information
Info Set
Item
Description
1
System time
DAY MONTH DATE TIME (hh:mm:ss) YEAR
2
Temperature
Displays, in degrees Celsius, the unit temperature.
Image # that the Packet Processor
is currently booted from
By default displays Latest, unless “Packet Processor Boot
From” is set to Image #1 or Image #2
Image # that the base modem is
currently booted from.
By default displays Latest, unless “Base Modem Boot From” is
set to Image #1 or Image #2
Parameter (PARAM) file that the
Packet Processor is currently
configured from
Displays PARAM file from Flash or Factory Default if no
parameter file is found in flash memory.