SLM-5650B Satellite Modem
Revision 2
NP Interface Telnet/SSH CLI Operation 9–4 MN-SLM-5650B
Any changes made via the CLI should be saved to permanent storage prior to terminating the CLI
session. Although changes are retained after a CLI session ends (as long as the modem remains
running), take note also that changes will be lost if, for example, the modem is rebooted or the NP
Interface is reset or loses power.
Modified parameters can be saved by issuing the Save command “S” from any menu. The user is
prompted to confirm that all changes should be made permanent:
The user is prompted, when attempting to terminate a CLI session via Logout command “L”, to
verify that the CLI session should be ended:
To Next Page
Loading...
