Comtech EF Data SLM-5650B - Page 388

SLM-5650B Satellite Modem
Revision 2
Appendix C C–60 MN-SLM-5650B
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx Ternary
Code
RTC=
1 byte
Command or Query.
Rx Ternary Code, where:
0 = AMI
1 = B8ZS
2 = B6ZS
3 = HDB3
Example: RTC = 3 (Set Rx Ternary Code to HDB3)
RTC=
RTC?
RTC*
RTC#
RTC?
RTC=x
(see Description
of Arguments)
Receive T1
Framing
T1F= 1 byte Command or Query.
Receive T1 Framing, where:
0 = None
1 = G.704
Note: Commands as well as queries are not allowed when either
the GigaBit Ethernet or NP card has been selected as the current
interface type.
Example: T1F = 0
T1F=
T1F?
T1F*
T1F#
T1F? T1F=x
(see Description
of Arguments)
Receive T2
Framing
T2F=
1 byte
Command or Query.
Receive T2 Framing, where:
0 = None
1 = G.704
2 = Reserved
3 = G.743
4 = Reserved
5 = G.747
Note: Commands as well as queries are not allowed when either
the GigaBit Ethernet or NP card has been selected as the current
interface type.
Example: T2F = 0
T2F=
T2F?
T2F*
T2F#
T2F?
T2F=x
(see Description
of Arguments)