Dalsa Genie Nano Series - Auto-Brightness Control Category; Auto-Brightness Feature Descriptions

114 • Operational Reference Nano Series GigE Vision Camera
Black Level BlackLevel Controls the black level as an absolute physical value. This represents a DC offset applied to the
video signal, in DN (digital number) units. The Black Level Selector feature specifies the channel to
adjust.
Beginner
Fast Readout Mode fastReadoutMode Selects the sensor’s readout mode. ver. 1.02
Guru
Off Off When this mode is off, the row blanking and row readout occur sequentially in the sensor.
Active Active When this mode is active, the row blanking and row readout occur in parallel in the sensor. This
helps achieve a lower total frame readout time resulting in a faster maximum frame rate. There are
minor DN column artifacts, typically of no significance.
Sensor FPN Correction
Mode
sensorFpnCorrectionMode Activation mode for the sensor Fixed Pattern Noise correction function. ver. 1.02
Guru
Off Off Disables the sensor FPN Correction Mode
Active Active Enables the sensor FPN Correction Mode.
Note: Applicable to the models listed below
M640, M640 NIR, C640
M800, M800 NIR, C800
M1280, M1280 NIR, C1280