Dalsa Genie Nano Series User Manual

Nano Series GigE Vision Camera Operational Reference • 209
Maximum Sustained
Frame Rate
maxSustainedFrameRate Maximum sustained frame rate that can be
achieved by the camera in the current
configuration (Resolution, Pixel Format and the
camera’s internal bandwidth limitations). When
TurboDrive is enabled, this value also takes the
feature transferAverageBlockSize into account.
1.03
DFNC
Beginner
Transfer Start TransferStart Starts the streaming of data Block(s) to another
device.
1.08
Expert
Transfer Stop TransferStop Stops the streaming of data Block(s) to another
device.
1.08
Expert
Transfer Abort TransferAbort Aborts the streaming of data Block(s) to another
device.
1.08
Expert
Device Registers
Streaming Start
DeviceRegistersStreamingStart Announces the start of registers streaming
without immediate checking for consistency.
1.00
Invisible
Device Registers
Streaming End
DeviceRegistersStreamingEnd Announces end of registers streaming and
performs validation for registers consistency
before activating them.
1.00
Invisible
Device Feature
Streaming Start
DeviceFeaturePersistenceStart Announces the start of feature streaming without
immediate checking for consistency.
1.00
Invisible
Device Feature
Streaming End
DeviceFeaturePersistenceEnd Announces end of feature streaming and performs
validation for feature consistency before
activating them.
1.00
Invisible
Register Check DeviceRegistersCheck Performs an explicit register set validation for
consistency.
1.00
Invisible
Registers Valid DeviceRegistersValid States if the current register set is valid and
consistent.
1.00
Invisible

Dalsa Genie Nano Series Specifications

General

Brand	Dalsa
Model	Genie Nano Series
Category	Security Camera
Language	English