232 • Operational Reference Nano Series GigE Vision Camera
DHCP Supported GevSupportedIPConfigurationDHCP Indicates if DHCP is supported by the
selected interface. This IP configuration
mode requires a DHCP server to allocate
an IP address dynamically over the range
of some defined subnet. The Nano must
be configured to have DHCP enabled. This
is the factory default settings. The DHCP
server is part of a managed network.
Windows itself does not provide a DHCP
server function therefore a dedicated
DHCP server is required. The DALSA
Network Configuration Tool can be
configured as a DHCP server on the NIC
used for the GigE Vision network. (RO)
Invisible
Persistent IP Supported GevSupportedIPConfigurationPersistentIP Indicates if Persistent IP is supported by
the selected interface. This protocol is
only suggested if the user fully controls
the assignment of IP addresses on the
network and a GigE Vision camera is
connected beyond routers. The GigE
Vision camera is forced a static IP
address. The NIC IP address must use the
same subnet otherwise the camera is not
accessible. If the Nano camera is
connected to a network with a different
subnet, it cannot be accessed. (RO)
Invisible
GVCP Extended Status
Codes
GevGVCPExtendedStatusCodes Enables generation of extended status
codes. (RO)
Invisible
GVCP Pending Timeout GevGVCPPendingTimeout Indicates the longest GVCP command
execution time before a device returns a
PENDING_ACK.
Invisible
I MCP HostPort GevMCPHostPort Indicates the port to which the device
must send messages. (RO)
Invisible
I MCDA GevMCDA Indicates the destination IP address for
the message channel. (RO)
Invisible
I MCSP GevMCSP This feature indicates the source port for
the message channel. (RO)
Invisible
Stream Channel Interface
Index
GevSCPInterfaceIndex Index of network interface. (RO)
Invisible
I SCP HostPort GevSCPHostPort Indicates the port to which the device
must send the data stream. (RO)
Invisible
I SCDA GevSCDA Indicates the destination IP address for
this stream channel. (RO)
Invisible
I SCSP GevSCSP Indicates the source port of the stream
channel. (RO)
Invisible
I First URL GevFirstURL Indicates the first URL to the XML device
description file.
Invisible
I Second URL GevSecondURL Indicates the second URL to the XML
device description file.
Invisible
I Major Version GevVersionMajor Major version of the specification.
I Minor Version GevVersionMinor Minor version of the specification.
Manifest Entry Selector DeviceManifestEntrySelector Selects the manifest entry to reference.
XML Major Version DeviceManifestXMLMajorVersion Indicates the major version number of the
XML file of the selected manifest entry.
Invisible
XML Minor Version DeviceManifestXMLMinorVersion Indicates the Minor version number of the
XML file of the selected manifest entry.
Invisible
XML SubMinor Version DeviceManifestXMLSubMinorVersion Indicates the SubMinor version number of
the XML file of the selected manifest
entry.
Invisible
Schema Major Version DeviceManifestSchemaMajorVersion Indicates the major version number of the
Schema file of the selected manifest
entry.
Invisible
To Next Page
Loading...
Need help?
General
